M6/T/S Set Up and Installation

M6/T/S Set Up and Installation

To successfully set up your iBaby Monitor M6/T/S, please ensure the following conditions are met. You also watch our installation videos for iOS and Android devices.

  • Make sure that your iOS device is connected to the same Wi-Fi network your wish to connect your iBaby monitor to.
  • Make sure that you have the strongest Wifi signal possible during the set up. We suggest performing the initial installation in close proximity (5-10 feet), to your Wi-fi router

Installing your iBaby Monitor M6/T/S for the first time:

  1. Attach the power adapter to back of the iBaby Monitor M6/T/S and plug into an electrical outlet.
  2. After 30 seconds, the monitor will play a short musical tune to signal that the startup has been completed.
  3. Connect the iOS device to the monitor by using the USB cable that came with your mobile device.
  4. Tap “allow” on the Share Wi-fi prompt that pops up, it should look like the one below:
  5. Tap “allow”
  6. Click “create an account” and fill out the form to create your iBaby cloud account.
  7. Follow the onscreen prompts to continue the process of installing the Camera.
  8. After the live stream has been established, unplug the USB cable as prompted by the app.

Click “Dismiss” and continue to use your monitor as planned.

To setup the iBaby Monitor M6/T/S in a new Wi-Fi location, please follow the steps below.

  1. Make sure that your iOS device is connected to the same Wi-Fi network your wish to connect your iBaby monitor to.
  2. Attach the power adapter to back of the iBaby Monitor M6/T/S and plug into an electrical outlet.
  3. After 30 seconds, the monitor will play a short musical tune to signal that the startup has been completed.
  4. Launch the iBaby Care app and login to your existing account.
  5. Tap the “List” icon, then select “Add Camera”
  6. Follow the on-screen instruction to complete set up

 

Absolutely! To install additional iBaby Monitor M6/T/S, please follow the steps below.

  1. Make sure that your iOS device is connected to the same Wi-Fi network your wish to connect your iBaby monitor to.
  2. Attach the power adapter to back of the iBaby Monitor M6/T/S and plug into an electrical outlet.
  3. After 30 seconds, the monitor will play a short musical tune to signal that the startup has been completed.
  4. Launch the iBaby Care app and log in to your existing account.
  5. Tap the “List” icon, then select “Add Camera”
  6. Follow the on-screen instruction to complete set up

 

To delete camera from your account, please follow the instructions below:

  1. Make sure to select the exact camera you wish to delete from the “Camera List” on the live feed screen
  2. Tap the “List” icon, then select “Settings”
  3. Choose “Delete [camera name]”
  4. A warning will come to confirm that you wish to delete the current camera
  5. Select “Yes”

 

Got more questions for us? Here are some options:

Here are several ways to contact us